4 ohm Speaker, (paper cone) fits many older White's models.
(electronic skills required)
P/N 401-2004

16 ohm Speaker, (Mylar cone) fits most current White's models.
(electronic skills required)
P/N 401-2002

3 Prong female (control box side) mono Headphone Jack. Fits most pre 1988 White's models.
(electronic skills required)
P/N 520-0140

4 Prong female (control box side) stereo Headphone Jack. Fits most post 1988 White's models.
(electronic skills required)
P/N 520-0140-1

Press on control knob. Fits most White's modes from 1980 to date.
P/N 402-0044

Headphone jack cover / plug. Use to protect female headphone jack (control box side) from dirt, sand, water, when headphones are not used.
P/N 528-0259

Nine volt snap on (transistor 9Vstyle snap) battery lead. Used on many White's models from 1968 - 2000.
P/N 520-0017

Twelve volt snap on (transistor 9V style snap) battery lead. Used on many White's models from 1968 - 2000.
P/N 520-0018

Fits GMT, Classics, and most older whites models (1980-2000).
Replace worn or broken pinpoint toggle.
Solder Skills Required
P/N 358-0011

Fits all XLT and DFX
Replace worn or broken pinpoint toggle.
P/N 802-7079-1

Fits M6, All MXT, All V3/V3i
Replace worn or broken pinpoint toggle.
P/N 802-7079-4

Peel and stick replacement LCD clear protective decal. Replace worn, scratched, or damaged LCD outer window (clear decal).
P/N 624-0463

Peel and stick replacement LCD clear protective decal. Replace worn, scratched, or damaged LCD outer window (clear decal).
P/N 624-0301

Peel and stick replacement LCD clear protective decal. Replace worn, scratched, or damaged LCD outer window (clear decal).
P/N 624-0396

Peel and stick replacement LCD clear protective decal. Replace worn, scratched, or damaged LCD outer window (clear decal).
P/N 624-0349

Peel and stick replacement LCD clear protective decal. Replace worn, scratched, or damaged LCD outer window (clear decal).
P/N 624-0287

Peel and stick replacement LCD clear protective decal. Replace worn, scratched, or damaged LCD outer window (clear decal).
P/N 624-0377

Thicker material than standard. Recommended for heavy sand, brush, or water use. Non adjustment hole position. Comes with arm cup strap.
P/N 802-5257

Converts Classics and early Goldmaster models from the standard two-piece rod assembly to a three-section assembly for tighter packing. (Does not fit Classic SL series instruments.)
P/N 802-5236

Protects speaker from dirt and moisture.
P/N 624-0264

Replacement "O" ring seal for main control box lid.
P/N 527-0043

Pair of foam pads for all White's Arm Cups (elbow supports). Peel and
stick.
P/N 802-5309

Replacement arm cup strap for lost or worn original equipment.
P/N 521-0011-1

Replacement Thumb Bolt for lost or worn original equipment. Stainless steel with thumb end permanently attached.
P/N 802-5164

(Match to #802-5164 Bolt) Replacement Thumb Nut for lost or worn original equipment. Brass threads.
P/N 402-0004

Pair (2) Velcro cable retainers. Secures loop cable to rod.
P/N 802-5311

Replacement lower rod section connecting the loop to the upper aluminum rod. (10" longer than standard.)
P/N 500-0242-3

Lengthened version of the standard "S" rod for use with any SL model and SL style hip-mount rod. (11" longer than standard.)
P/N 500-0240-1

Prizm PeeWee Rod Replacement lower rod makes the Prizm usable by even small children. Measuring a total of 18 inches long, it is 5 inches shorter than standard rods.
P/N 500-0242-4

Replacement lower rod section connecting the loop to the upper aluminum rod. When used with older models requires 802-5096-14 Adapter Kit
P/N 500-0242-1

Replacement Aluminum “S” rod standard equipment length, gloss black, with Cam Lock.
P/N 802-5213

Extends loop cable length by approximately 5'. Replacement extension for hipmount kits manufactured from 1979 through 1988.
P/N 802-7022

Extends loop cable length approximately 5'. Heavy duty for the DFX and MXT.
P/N 802-7205

Old-style seperate clevis for pre-1988 models. Connects loop to lower rod.
P/N 802-5096-3

Needed if replacing 1979 to early 1992 clevis or isolator with the later version lower fiber rod.
P/N 802-5096-14

Fits all search coils. Locks the search coil angle in place for working in brush, water, or tall weeds. Angle can be adjusted.
P/N 802-5190-4

Replacement nut, bolt and washers for current models.
P/N 802-5096-11